Tankless water heaters have become a popular option for many Saskatoon homeowners looking to save space and enjoy an uninterrupted supply of hot water. Because they heat water directly when needed, they eliminate the need for a large storage tank. This results in better energy efficiency and less wasted heat. However, like any mechanical appliance, tankless water heaters can experience problems and shut down, often displaying confusing error codes.
These error codes are built into the system to indicate what kind of issue is happening, and they help technicians pinpoint the source of the problem. For many homeowners, seeing these error messages pop up brings stress because they don’t understand what they mean. But identifying these codes early and taking the right steps can help avoid larger repairs. Understanding the basics helps Saskatoon homeowners feel more in control and gives our professionals a head start in resolving issues quickly.
Understanding Tankless Water Heater Error Codes
Tankless water heaters use built-in diagnostic tools to monitor how well the unit is working. If something disrupts normal operation, the system may limit its function or shut down altogether. When this happens, it will display either a numeric or alphanumeric code on the screen. These codes are typically visible on a digital display or a series of blinking lights.
Each code corresponds to a particular issue. Depending on the brand of the unit, the specific meaning may vary slightly, but the general idea stays the same. Some error codes relate to airflow, gas supply, or electronic malfunctions. Others warn of overheating or poor water circulation. It’s not always possible to understand the problem just by symptoms like reduced water temperature or flow.
Common causes of error codes include:
– Blocked air or exhaust vents
– Gas supply interruptions
– Overheating from poor water flow
– Flame or ignition failures
– Loose wiring or sensor faults
While some owners attempt simple fixes, the safest route is documenting the code and contacting our professionals. Homeowners can refer to their unit’s manual for brief explanations, but that alone cannot replace a skilled inspection by our technicians. Acting at the first sign of trouble can keep minor issues from becoming bigger and costlier repairs.
Common Error Codes And Their Meanings
Knowing what an error code means can be helpful when describing the issue to our technicians. While each brand uses slightly different wording, these are the most commonly seen error codes and what they generally indicate:
1. Error Code 10: Venting Problems
This code appears when there is poor airflow through the vent system. Since tankless water heaters rely on clear air movement to operate safely, any blockage or leak can reduce performance or cause the system to shut down.
Common causes include:
– Clogged intake or exhaust vents
– Incorrectly installed vent systems
– Damaged or leaky vent piping
2. Error Code 11: Ignition Failure
If the system fails during ignition, this error code is triggered. It means the burner is not lighting as it should.
Likely causes for this include:
– Gas supply is turned off or restricted
– Ignition components are faulty
– Wiring connections are broken or loose
3. Error Code 16: Over Temperature Warning
This code warns that the water inside the heater is getting too hot. Overheating strains the unit and can indicate another problem.
Possible triggers are:
– Low water flow through the unit
– A temperature sensor fault
– Temperature setting is too high
4. Error Code 29: Flame Failure
This means the system initially ignited a flame, but it did not stay lit.
Common causes are:
– Inconsistent gas pressure
– Electronic control failure
– Flame sensor is dirty or not lined up correctly
5. Error Code 90: Air Supply or Exhaust Blockage
This code shows the system senses a blockage either at intake or exhaust.
Check for:
– Dirt, pests, or ice in vents
– Damaged piping
– Closed flaps or blocked screens
Each of these issues affects the performance and safety of the water heater. Identifying the exact code helps our technicians resolve the problem quickly. If you notice lowered water temperature or an unexpected system shutdown, note any error code displayed before contacting us.
Steps To Take When Encountering Error Codes
Seeing an error code might cause stress, but not every code means expensive repairs. Some problems are surface-level and easy to address, while others need our technicians for safe and complete repair work.
Here are the first actions to take when you notice an error code:
– Check for visible problems around the unit. Blocked air intake or exhaust vents are common triggers. Remove any debris or obstructions.
– Restart the unit by turning it off and on again. This resets the system and may resolve temporary faults. If the error returns right away, there may be an ongoing issue.
– Make sure that water valves are fully open. Low water flow can lead to overheating or ignition failure.
– Look up the code in your water heater’s manual for initial guidance. While that won’t fix the issue, it helps understand what type of problem is occurring.
– Avoid opening the unit or tampering with parts inside. Doing so may void the warranty and cause more damage.
If the same code appears after a reset or the system doesn’t resume operation, it’s time to bring in our professionals. Our technicians have specialized tools and training to identify internal faults and perform safe repairs. Repeated attempts to clear the code without fixing the true cause may lead to long-term system damage.
A Saskatoon homeowner recently encountered a repeated Error Code 11. Although they confirmed gas and power were connected properly, the unit still failed to ignite. After our technicians examined the unit, the problem was traced to a loose ignitor wire. Having it fixed quickly avoided damage to the ignition module.
Maintenance Tips To Prevent Error Codes
Maintaining your tankless water heater helps avoid sudden errors and interruptions. Simple upkeep keeps the system dependable and protects your investment.
Here are effective maintenance habits homeowners in Saskatoon can follow:
– Have your system inspected each season by licensed HVAC contractors in Saskatoon, especially before heavy-use months.
– Regularly check and clean around vents to keep airflow unblocked.
– Monitor your water pressure. Installing a pressure regulator protects components from strain caused by pressure that is too high.
– Flush your unit once a year. This removes scale and sediment that can build up inside, especially in areas with hard water.
– Avoid setting the temperature too high. Running the system at extreme settings increases wear on sensors and heating elements.
Some maintenance requires technical skill, but others—like checking for physical blockages—can be done at home. Routine inspections by our technicians extend your unit’s life and help catch issues before they lead to shutdowns or damage.
Protecting Your System From Bigger Problems
By understanding what tankless water heater error codes mean and knowing when to take action, homeowners can protect against system failure and costly repairs. These warnings signal that something important needs attention, and the sooner it’s checked, the better.
During the summer in Saskatoon, hot water usage typically increases. Whether it’s daily showering, cleaning, or outdoor chores, your heater is likely to run longer hours. That’s why keeping it in good shape is especially important during this time.
Even if the heater seems to be working, early signs like reduced water temperature or slow ignition might point to pending trouble. Dealing with these early makes repairs faster and often more affordable.
Take error codes seriously, but don’t panic. Let them guide you to informed action. When in doubt, store the code shown, and contact our professionals. With the right care and support, your tankless water heater can continue serving your Saskatoon home reliably each day.
If your tankless water heater is showing signs of trouble, rely on Efficiency Heating, Cooling & Fireplaces for expert support from HVAC contractors in Saskatooncontact us today.
